Rachid Aissaoui, École de technologie supérieure

Research

dynamique prédictive electromyographie ingénierie de la réadaptation mesure inertielle du mouvement modélisation musculosquelettique modélisation poroviscoélastique du cartilage moteur de positionnement virtuel problème linéaire complémentaire

Latest papers

Handrim Reaction Force and Moment Assessment Using a Minimal IMU Configuration and Non-Linear Modeling Approach during Manual Wheelchair Propulsion.
Sensors (Basel, Switzerland) · 2024 · first author
Seated postural organization during bilateral upper limb symmetric and asymmetric pushing tasks in individuals after stroke compared to healthy controls.
Gait & posture · 2023
Effect of Haptic Training During Manual Wheelchair Propulsion on Shoulder Joint Reaction Moments.
Frontiers in rehabilitation sciences · 2022 · first author

All 19 publications

Latest funding

Développement technologique de la genougraphie grâce à l'intelligence artificielle et accélération du transfert de l'innovation
NSERC · 2021 · Co-investigator
$284,514
Dynamique prédictive et modélisation articulaire pour le développement d'un moteur de positionnement intelligent pour un mannequin virtuel: application en ergonomie virtuelle et en réadaptation
NSERC · 2018 · Principal investigator
$192,000
Développement d'un moteur de positionnement permettant de générer des postures plausibles et répétables pour l'ergonomie virtuelle
NSERC · 2015 · Principal investigator
$286,932

All 11 grants and awards

19 publications.

01

Handrim Reaction Force and Moment Assessment Using a Minimal IMU Configuration and Non-Linear Modeling Approach during Manual Wheelchair Propulsion.

Aissaoui R, De Lutiis A, Feghoul A, Chénier F

Sensors (Basel, Switzerland)2024First author

DOI: 10.3390/s24196307 PMID: 39409347

02

Seated postural organization during bilateral upper limb symmetric and asymmetric pushing tasks in individuals after stroke compared to healthy controls.

Akremi H, Higgins J, Guediri A, Aissaoui R, Nadeau S

Gait & posture2023

DOI: 10.1016/j.gaitpost.2023.06.011 PMID: 37343399

03

Effect of Haptic Training During Manual Wheelchair Propulsion on Shoulder Joint Reaction Moments.

Aissaoui R, Gagnon D

Frontiers in rehabilitation sciences2022First author

DOI: 10.3389/fresc.2022.827534 PMID: 36188985

04

Bilateral motor coordination during upper limb symmetric pushing movements at two levels of force resistance in healthy and post-stroke individuals.

Akremi H, Higgins J, Aissaoui R, Nadeau S

Human movement science2022

DOI: 10.1016/j.humov.2021.102913 PMID: 34952321

05

Postural organization and inter-limb coordination are altered after stroke when an isometric maximum bilateral pushing effort of the upper limbs is performed.

Bruyneel AV, Higgins J, Akremi H, Aissaoui R, Nadeau S

Clinical biomechanics (Bristol, Avon)2021

DOI: 10.1016/j.clinbiomech.2021.105388 PMID: 34052694

06

Knee loading in OA subjects is correlated to flexion and adduction moments and to contact point locations.

Zeighami A, Dumas R, Aissaoui R

Scientific reports2021Senior author

DOI: 10.1038/s41598-021-87978-2 PMID: 33883591

07

Activity Monitor Placed at the Nonparetic Ankle Is Accurate in Measuring Step Counts During Community Walking in Poststroke Individuals: A Validation Study.

Duclos NC, Aguiar LT, Aissaoui R, Faria CDCM, Nadeau S, Duclos C

PM & R : the journal of injury, function, and rehabilitation2019

DOI: 10.1002/pmrj.12080 PMID: 30688026

08

Wheelchair pushrim kinetics measurement: A method to cancel inaccuracies due to pushrim weight and wheel camber.

Chénier F, Aissaoui R, Gauthier C, Gagnon DH

Medical engineering & physics2017

DOI: 10.1016/j.medengphy.2016.12.002 PMID: 27988329

09

A more symmetrical gait after split-belt treadmill walking increases the effort in paretic plantar flexors in people post-stroke.

Lauzière S, Miéville C, Betschart M, Duclos C, Aissaoui R, Nadeau S

Journal of rehabilitation medicine2016

DOI: 10.2340/16501977-2117 PMID: 27345026

10

A new dynamic model of the wheelchair propulsion on straight and curvilinear level-ground paths.

Chénier F, Bigras P, Aissaoui R

Computer methods in biomechanics and biomedical engineering2015Senior author

DOI: 10.1080/10255842.2013.869318 PMID: 24484386

Développement technologique de la genougraphie grâce à l'intelligence artificielle et accélération du transfert de l'innovation

Co-investigatorNSERC2021Alliance Grants

Principal investigators: Hagemeister, Nicola NJ

Keywords: analyse de biomarqueurs mécaniques; analyse du mouvement; bases de données; biomécanique; capteurs inertiels; estimation de pose; Intelligence artificielle; télémédecine

$284,514

Dynamique prédictive et modélisation articulaire pour le développement d'un moteur de positionnement intelligent pour un mannequin virtuel: application en ergonomie virtuelle et en réadaptation

Principal investigatorNSERC2018Discovery Grants Program - Individual

Principal investigators: Aissaoui, Rachid

Keywords: dynamique prédictive; electromyographie; ingénierie de la réadaptation; mesure inertielle du mouvement; modélisation musculosquelettique; modélisation poroviscoélastique du cartilage; moteur de positionnement virtuel; problème linéaire complémentaire; quaterniondual et paramètres de CayleyKlein; simulation haptique de la mobilité

$192,000

Développement d'un moteur de positionnement permettant de générer des postures plausibles et répétables pour l'ergonomie virtuelle

Principal investigatorNSERC2015Collaborative Research and Development Grants

Principal investigators: Aissaoui, Rachid

$286,932

Analyse de l'énergie de propulsion en fauteuil roulant manuel chez le blessé médullaire dans les situations de terrain

Principal investigatorNSERC2012Engage Grants Program

Principal investigators: Aissaoui, Rachid

$25,000

Développement d'un outil mécanobiologique pour l'évaluation et le suivi du traitement thérapeutique de la gonarthrose

Principal investigatorNSERC2012Discovery Grants Program - Individual

Principal investigators: Aissaoui, Rachid

$100,000

Développement d'un contrôleur à 7 ddl pour le bras robotisé JACO basé sur le traitement automatique en temps-réel du signal EMG des muscles résiduelles chez le blessé médullaire

Principal investigatorNSERC2011Engage Grants Program

Principal investigators: Aissaoui, Rachid

$25,000

Développement de technologies biomédicales pour le diagnostic quantitatif du pivot shift

Co-investigatorNSERC2006Collaborative Research and Development Grants

Principal investigators: Hagemeister, Nicola

$129,780

Modèle musculaire dynamique pour l'estimation des forces de contact articulaires

Principal investigatorNSERC2006Discovery Grants Program - Individual

Principal investigators: Aissaoui, Rachid

$95,000

Développement d'un analyseur de genou

Co-investigatorNSERC2004Idea to Innovation

Principal investigators: DeGuise, Jacques

$200,000

Development of a platform for the modeling and the functional evalutation of the biomechanics of human motion with musculoskeletal disorders

Principal investigatorNSERC2003Discovery Grants Program - Individual

Principal investigators: Aissaoui, Rachid

$39,000

From CIHR, NSERC and SSHRC funding decisions: CIHR since 2008, NSERC since 1991 and SSHRC since 1998, including their latest published competition results.

Frequent collaborators

Génie de la production automatisée
génie de la production automatisée
Mechanical engineering
Epidemiology and Biostatistics

Co-authors at École de technologie supérieure, colored by department. Thicker lines mean more shared papers; select anyone to open their profile and their own map.

Sylvie Nadeau

Mechanical engineering

6 shared papers, latest 2023

Nicola Hagemeister

Génie de la production automatisée

3 shared papers, latest 2008

Yue Li

Epidemiology and Biostatistics

1 shared papers, latest 2005

Jacques de Guise

Génie de la production automatisée

1 shared papers, latest 2005

Write to this professor

A short, specific email works best. This draft uses one of their recent papers; replace the parts in brackets with your own details before sending.

Applying for

Paper to mention

Subject: Prospective PhD student: dynamique prédictive Dear Professor Aissaoui, My name is [your name], and I am a [your current degree or role] at [your institution]. I am applying for a PhD position starting in [term and year]. I read your paper "Handrim Reaction Force and Moment Assessment Using a Minimal IMU Configuration and Non-Linear Modeling Approach during Manual Wheelchair Propulsion." (2024), and it connects closely to my own work on [your research topic]. [One or two sentences on what you did and what you learned.] Are you accepting new PhD students for [term and year]? I have attached my CV and transcripts, and I would be glad to talk at a time that suits you. Thank you for your time. Kind regards, [your name]