Faculty profile
Victor Songmene
Back to facultyThis profile is built from public research funding records (CIHR, NSERC and SSHRC) and PubMed. We have not imported them from a École de technologie supérieure directory, so their courses may be missing. Find their university profile.
Research
Latest papers
Effects of Alloy Composition, Hardness, and Milling Parameters on the Cutting Forces of Al-Li-Based Alloys.
Materials (Basel, Switzerland) · 2025
Effect of Melt Treatment and Heat Treatment on the Performance of Aluminum Cylinder Heads.
Materials (Basel, Switzerland) · 2025
Effect of Fe Concentration and Superheating on the Microstructure and Tensile Properties of High Mg 413.0-Type Alloys: Role of Sr, Be, P, and La.
Materials (Basel, Switzerland) · 2025
Latest funding
- $39,000
Développement de la transformation/finition saine et durable des roches dures et des pierres artificielles
NSERC · 2024 · Principal investigator
- $366,865
New generation of tools for wood cutting industry
NSERC · 2021 · Co-investigator
- $192,000
Étude et optimisation de l'usinage propre et haute performance des matériaux durs et poussiéreux
NSERC · 2018 · Principal investigator
20 publications.
Effects of Alloy Composition, Hardness, and Milling Parameters on the Cutting Forces of Al-Li-Based Alloys.
Radan L, Songmene V, Samuel AM, Samuel FH
Effect of Melt Treatment and Heat Treatment on the Performance of Aluminum Cylinder Heads.
Doty HW, Samuel E, Samuel AM, Songmene V, Samuel FH
Effect of Fe Concentration and Superheating on the Microstructure and Tensile Properties of High Mg 413.0-Type Alloys: Role of Sr, Be, P, and La.
Doty HW, Samuel E, Samuel AM, Elsharkawi E, Songmene V, Samuel FH
Analysis of Ni-Cu Interaction in Aluminum-Based Alloys: Hardness, Tensile and Precipitation Behavior.
Samuel E, Samuel AM, Songmene V, Doty HW, Samuel FH
Experimental Investigation on the Effects of Tool Geometry and Cutting Conditions on Machining Behavior during Edge Finishing of Granite Using Concave and Chamfered Profiling Tools.
Mateur W, Songmene V, Kouam J
Effect of Aging Treatment on the Strength and Microstructure of 7075-Based Alloys Containing 2% Li and/or 0.12% Sc.
Tahmasbi A, Samuel AM, Zedan Y, Songmene V, Samuel FH
Investigating the Effect of Heat Treatment on the Microstructure and Hardness of Aluminum-Lithium Alloys.
Radan L, Songmene V, Zedan Y, Samuel FH
Experimental Investigation on Part Quality and Dust Emission during Minimum Quantity Lubricated (MQL) Edge Finishing of Granite.
Bahri H, Songmene V, Kouam J
Effect of Zr and Ti Addition and Aging Treatment on the Microstructure and Tensile Properties of Al-2%Cu-Based Alloys.
Samuel E, Nabawy AM, Samuel AM, Doty HW, Songmene V, Samuel FH
Mechanical Performance and Precipitation Behavior in Al-Si-Cu-Mg Cast Alloys: Effect of Prolonged Thermal Exposure.
Abdelaziz MH, Samuel AM, Doty HW, Songmene V, Samuel FH
Développement de la transformation/finition saine et durable des roches dures et des pierres artificielles
Principal investigators: Songmene, Victor
Keywords: transformation par usinage; finition par polissage des surfaces et des bords des pièces; perçage; granite, marbre et pierres artificielles; santé et sécurité du travail; qualité de l'air intérieur; réduction des effluents à la source; particules, aérosols fins et aérosols ultrafins; captation et réutilisation des particules; optimisation des conditions de transformation
New generation of tools for wood cutting industry
Principal investigators: Jahazi, Mohammad M
Keywords: electron microscopy; heat treatment optimization; impact resistance alloys; microstructure evolution; microstructure modeling; phase transformation; simulation of manufacturing process; steels; thermomechanical processing; wear resistance coatings
Étude et optimisation de l'usinage propre et haute performance des matériaux durs et poussiéreux
Principal investigators: Songmene, Victor
Keywords: Captation et stabilisation; Granites et marbres; Optimisation; Particules fines et particules ultrafines; percage, détourage, polissage CNC et robotique; Qualité de l'air et silice cristalline; Qualité des pièces et productivité; Réduction à la source; Réutilisation des poussières; Usinage propre et haute performance
Forging and machining process design for nickel superalloy rene65 for use in compressor blades
Principal investigators: Yue, Stephen
Usinage propre et concurrentiel des matériaux metalliques et des composites
Principal investigators: Songmene, Victor
Machining effects on part integrity and life of aircraft materials
Principal investigators: Brochu, Myriam
Optimization of the machining processes of graphite/epoxy composites and multilayer materials
Principal investigators: Chatelain, JeanFrançois
Alésoir acétabulaire à diamètre variable
Principal investigators: Petit, Yvan
Usinage propre et concurrentiel des métaux et des composites
Principal investigators: Songmene, Victor
Étude de fabrication de pièces axisymétriques épaisses avec profil complexe en acier à haute résistance
Principal investigators: Champliaud, Henri
From CIHR, NSERC and SSHRC funding decisions: CIHR since 2008, NSERC since 1991 and SSHRC since 1998, including their latest published competition results.
Frequent collaborators
- Scott Weichenthal and Sylvie Nadeau: 1 shared paper
- Scott Weichenthal and Victor Songmene: 1 shared paper
- Sylvie Nadeau and Victor Songmene: 1 shared paper
- Stephen Yue and Victor Songmene: 1 shared paper
- Manjusri Misra and Victor Songmene: 1 shared paper
- Mohammad Jahazi and Victor Songmene: 1 shared paper
- Génie Mécanique
- Engineering, School of
- Génie mécanique
- Epidemiology, Biostatistics and Occupational Health
- Department of Mining and Materials Engineering, Faculty of Engineering
- Mechanical engineering
Co-authors at École de technologie supérieure, colored by department. Thicker lines mean more shared papers; select anyone to open their profile and their own map.
Scott Weichenthal
Epidemiology, Biostatistics and Occupational Health
1 shared papers, latest 2013
Sylvie Nadeau
Mechanical engineering
1 shared papers, latest 2013
Stephen Yue
Department of Mining and Materials Engineering, Faculty of Engineering
1 shared papers, latest 2019
Manjusri Misra
Engineering, School of
1 shared papers, latest 2020
Mohammad Jahazi
Génie mécanique
1 shared papers, latest 2020
A short, specific email works best. This draft uses one of their recent papers; replace the parts in brackets with your own details before sending.