Stephen Yue, McGill University

Research

Cold spray microstructural characterization particle-substrate bonding plastic deformation powder metallurgy sinter annealing surface texturing metal powders

Latest papers

On the Importance of Secondary Component Properties for Cold Spray Metallization of Carbon Fiber Reinforced Polymers.
Journal of thermal spray technology · 2022 · senior author
Scanning Electron Microscopy versus Transmission Electron Microscopy for Material Characterization: A Comparative Study on High-Strength Steels.
Scanning · 2021
Development of a micro-scale method to assess the effect of corrosion on the mechanical properties of a biodegradable Fe-316L stent material.
Journal of the mechanical behavior of biomedical materials · 2021

All 7 publications

Latest funding

Hydrogen embrittlement susceptibility of case-hardened screws for applications in aerospace, mass timber construction, automotive, manufacturing, and hydrogen storage and transport
NSERC · 2024 · Co-investigator
$78,000
Cold spray fundamental studies by single particle impact observations and analysis
NSERC · 2023 · Principal investigator
$84,000
Mechanical properties of thin wall specimens produced by additive manufacturing methods
NSERC · 2022 · Principal investigator
$80,000

All 71 grants and awards

7 publications.

01

On the Importance of Secondary Component Properties for Cold Spray Metallization of Carbon Fiber Reinforced Polymers.

Liberati AC, Che H, Aghasibeig M, Yu KR, Vo P, Yue S

Journal of thermal spray technology2022Senior author

DOI: 10.1007/s11666-022-01323-1 PMID: 37520903

02

Scanning Electron Microscopy versus Transmission Electron Microscopy for Material Characterization: A Comparative Study on High-Strength Steels.

Brodusch N, Brahimi SV, Barbosa De Melo E, Song J, Yue S, Piché N, Gauvin R

Scanning2021

DOI: 10.1155/2021/5511618 PMID: 34025898

03

Development of a micro-scale method to assess the effect of corrosion on the mechanical properties of a biodegradable Fe-316L stent material.

Frattolin J, Cattarinuzzi E, Rajagopalan S, Gastaldi D, Vena P, Yue S, Bertrand OF, Mongrain R

Journal of the mechanical behavior of biomedical materials2021

DOI: 10.1016/j.jmbbm.2020.104173 PMID: 33160911

04

A manufacturing and annealing protocol to develop a cold-sprayed Fe-316L stainless steel biodegradable stenting material.

Frattolin J, Roy R, Rajagopalan S, Walsh M, Yue S, Bertrand OF, Mongrain R

Acta biomaterialia2019

DOI: 10.1016/j.actbio.2019.08.034 PMID: 31449928

05

Machinability of Rene 65 Superalloy.

Olufayo OA, Che H, Songmene V, Katsari C, Yue S

Materials (Basel, Switzerland)2019Senior author

DOI: 10.3390/ma12122034 PMID: 31242585

06

Bio-inspired and optimized interlocking features for strengthening metal/polymer interfaces in additively manufactured prostheses.

Alsheghri AA, Alageel O, Amine Mezour M, Sun B, Yue S, Tamimi F, Song J

Acta biomaterialia2018

DOI: 10.1016/j.actbio.2018.09.029 PMID: 30244027

07

Development of a Novel Biodegradable Metallic Stent Based on Microgalvanic Effect.

Frattolin J, Barua R, Aydin H, Rajagopalan S, Gottellini L, Leask R, Yue S, Frost D, Bertrand OF, Mongrain R

Annals of biomedical engineering2016

DOI: 10.1007/s10439-015-1458-5 PMID: 26384666

Hydrogen embrittlement susceptibility of case-hardened screws for applications in aerospace, mass timber construction, automotive, manufacturing, and hydrogen storage and transport

Co-investigatorNSERC2024Alliance Grants

Principal investigators: Song, Jun J

Keywords: case-hardened material; coating; corrosion; fracture; hydrogen diffusion; hydrogen embrittlement; mechanical testing; microstructure; numerical modeling

$78,000

Cold spray fundamental studies by single particle impact observations and analysis

Principal investigatorNSERC2023Discovery Grants Program - Individual

Principal investigators: yue, stephen

Keywords: cold spray; powder metallurgy; plastic deformation; surface texturing; microstructural characterization; particle-substrate bonding; sinter annealing

$84,000

Mechanical properties of thin wall specimens produced by additive manufacturing methods

Principal investigatorNSERC2022Alliance Grants

Principal investigators: Yue, Stephen S

Keywords: Aluminum alloys; Binder jet additive manufacturing; mechanical properties; metal powders; Microstructure; Selected laser powder bed fusion; Titanium alloys

$80,000

Incremental manufacturing platform for the fabrication of lightweight high-strength aluminum vehicle structures

Principal investigatorNSERC2021Alliance Grants

Principal investigators: Yue, Stephen S

Keywords: cold spray additive manufacturing; dimensional characterization; heat treatment; high strength aluminum alloys; hybrid manufacturing; laser assisted; load bearing structures; part warpage modeling; topology optimization

$300,733

Design of high performance antiviral and antibacterial cold spray coatings for continuous disinfection on high-touch surfaces

Principal investigatorNSERC2021Alliance Grants

Principal investigators: Yue, Stephen S

Keywords: anti bacterial; antiviral; coatings; cold spray; copper and copper alloys; corrosion; fomites; high touch surfaces; metal powders; wear

$550,000

Improving the hydrogen embrittlement resistance of quench and tempered high strength steels used as oil country tubular goods with niobium alloying additions

Principal investigatorNSERC2020Alliance Grants

Principal investigators: Yue, Stephen S

$118,100

Development and validation of a SARS-CoV-2 antiviral coatings for high-touch critical surfaces_x000d_ _x000d_

Principal investigatorNSERC2020Alliance Grants

Principal investigators: Yue, Stephen

$50,000

Mechanical properties of thin wall specimens produced by additive manufacturing methods _x000d_

Principal investigatorNSERC2020Alliance Grants

Principal investigators: Yue, Stephen

$20,000

Analysis and modelling of steel hot rolling assisted by machine learning

Principal investigatorNSERC2019Collaborative Research and Development Grants

Principal investigators: Yue, Stephen

$317,500

Effect of chemical composition and heat treatment on hydrogen embrittlement susceptibilities of 4340M Martensitic and Bainitic steels

Co-investigatorNSERC2019Collaborative Research and Development Grants

Principal investigators: Song, Jun

$253,580

From CIHR, NSERC and SSHRC funding decisions: CIHR since 2008, NSERC since 1991 and SSHRC since 1998, including their latest published competition results.

Frequent collaborators

Mechanical Engineering
Department of Mining and Materials Engineering, Faculty of Engineering
Mining and Materials Engineering
materials engineering
Chemical Engineering
Génie Mécanique
Other

Co-authors at McGill University, colored by department. Thicker lines mean more shared papers; select anyone to open their profile and their own map.

Rosaire Mongrain

Mechanical Engineering

3 shared papers, latest 2021

Jun Song

Mining and Materials Engineering

2 shared papers, latest 2021

Richard Leask

Chemical Engineering

1 shared papers, latest 2016

Victor Songmene

Génie Mécanique

1 shared papers, latest 2019

Raynald Gauvin

materials engineering

1 shared papers, latest 2021

Faleh Tamimi

Faculty

1 shared papers, latest 2018

David Frost

Mechanical Engineering

1 shared papers, latest 2016

Write to this professor

A short, specific email works best. This draft uses one of their recent papers; replace the parts in brackets with your own details before sending.

Applying for

Paper to mentionMention their NSERC grant from 2023

Subject: Prospective PhD student: Cold spray Dear Professor Yue, My name is [your name], and I am a [your current degree or role] at [your institution]. I am applying for a PhD position starting in [term and year]. I read your paper "On the Importance of Secondary Component Properties for Cold Spray Metallization of Carbon Fiber Reinforced Polymers." (2022), and it connects closely to my own work on [your research topic]. [One or two sentences on what you did and what you learned.] I also saw your NSERC-funded project "Cold spray fundamental studies by single particle impact observations and analysis" (2023), and I would be glad to contribute to work in that direction. Are you accepting new PhD students for [term and year]? I have attached my CV and transcripts, and I would be glad to talk at a time that suits you. Thank you for your time. Kind regards, [your name]